The revolutionary and patented Disc Blade system, designed and manufactured by GreenMech, is a standard feature on GreenMech machines. It provides a more efficient and cost effective alternative to conventional cutting devices, offering:

• Reduction in costly down time
• Less susceptible to damage
• Reduced noise levels

See how it works
Although the discs mounted on the flywheel have a fully sharpened circumference, only about a 1/3 of the cutting edge on each disc is in use at any one time. When this edge becomes worn, the blades is rotated to provide a new sharp edge, without removing the blade,meaning less down time and a longer period between sharpenings, compared to  flat blade or flail systems.

See how simple
When the in-use section of a Disc Blade chipping edge loses sharpness, the retaining nut on the flywheel is slackened and the blade turned 120 degrees to the next sharp section. Re-tighten to the correct torque setting and the machine is then ready to give you another 50-100 hours of cutting before the Disc Blade is rotated again or eventually taken off for complete re-sharpening.

See how it saves
GreenMech Disc Blades can give you up to 6 times more blade life. One operator recorded his Disc Blade performance to show 150 - 170 hours work between sharpenings and a life expectancy of the blade in excess of 1200 hours. By comparison conventional blades needed sharpening every 23 - 50 hours and replacement every 200 hours, if not damaged earlier. This equated to the Disc Blade system saving him over £1000 per year