GreenMech Ltd • The Mill Industrial Park • Kings Coughton • Alcester • Warwickshire • B49 5QG • UK ••• Tel: +44 (0) 1789 400044 • E-mail: sales@greenmech.co.uk
specialist and multi-purpose machines for arboriculture, forestry and groundwork contracting services
|
|
|
|
|
|
The CS 100 is a compact machine for chipping trees, branches, shrubs, hedge cuttings and all other organic waste. It is intended for professional users and has the highest productivity in its category.
The rotor, fitted with two long-life reversible blades, is driven by a Vanguard® V-Twin engine through 2 industrial V-belts. The open design of the in-feed chute enables large volumes of material to be introduced without excessive cutting, saving time and money.
Due to the design of the rotor, branches, twigs and hedge cuttings are automatically drawn into the machine and, as a result, in-feed rollers are not required. The centrifugal force created by the rotor ejects the chipped material up and out of the discharge chute some 6 m to 10 m (depending on the material).
The chassis of the CS 100 is built of 5-mm thick steel, powder coated to automotive standards and not only will the chassis stand up to the knocks and bumps of daily use but it should keep its looks for many years to come.
The design of the in feed chute allows unimpeded access to the drum giving maximum exposure to the 315 mm wide chipping area. This helps reduce the amount of trimming and makes the CS 100 an ideal machine for reducing bulky brash down to fine chips.
Check out the features
Highest productivity in its category
Can easily process 20 - 25 m3 of fed material per day, depending on the type of organic waste.
Wide in-feed chute
Copes easily with large volumes of vegetation - e.g., twigs, hedge trimmings and conifer tops.
Chips timber up to 10 cm diameter
Cutting branches off is often unnecessary and material up to 10 cm (4") will self feed. Larger sizes can be input manually.
Process all kinds of wood and vegetation
From light and dry through to wet and leafy. Once through the rotor, chips are ejected via fully adjustable discharge chute.
Controllable discharge throw
Use of deflector plate enables chips can be projected high and thrown over 5 metres, into container or trailer. Discharge chute head rotates to direct throw where you need it.
Easily be towed by a compact garden tractor
Or small utility truck. (Not road legal: a dedicated road legal trailer is available).
Ideal for narrow access areas
At only 76 cm wide, the compact CS 100 allows use where normal chippers can't go. Both in-feed and discharge chutes can be quickly removed, allowing access through width/ height restricted areas. Ideal for transporting in small vans or fitting into lifts, when work needs to be done on roof terraces.
High Grade Sheffield® steel blade
Long life expectancy and will retain their edge for many hours of use before re-sharpening is required.
Compact and versatile for professional superiority
